• <div id="2ii0i"><button id="2ii0i"></button></div>
  • <div id="2ii0i"><li id="2ii0i"></li></div>
  • <div id="2ii0i"></div>

  • EngLish | ÖÐÎÄ°æ  
    Drilling Mud Purification System
    LW Drilling Mud Decanter Centrifuge
    LW Large Displacement Decanter Centrifuge
    GLW High-Speed Centrifuge
    GLW-BP400 High-Speed Variable Frequency Centrifuge
    Sand Pump
    Vertical Sand Pump
    Shear Pump
    NJ Mud Agitator
    NJC Gear Type Mud Agitator
    Submersible Slurry Pump
    SB100¡Á80 Mud Pump
    Metering Pump
    Desilter
    Desander
    Vacuum Degasser
    Mud Cleaner
    Mud Gas Sepatator
    Jet mixing device
    Flare Ignition Device
    Mud Gun
    Shale Shaker
    Venturi Hopper
     
      The current position£ºHome > LW Drilling Mud Decanter Centrifuge
    Last         Next
    ¡¡¡¡¡¡Product description
    Overview:

    The centrifuge we produce if special equipment for separating the solid from the liquid. The machine has suitability for different well drilling procedure and high process capacity. It can separate out the ultra micro harmful solid-state grains in the drilling mud. At the same time, the transporter blade in this machine is inlaid with hard alloy block that elongates its service life considerably.

    Installation, use and maintenance:

    1, Centrifuges to be installed on top of the new entrance to the 3rd tank away from the drilling pump, can also be arranged according to the actual situation.
    2, Frequently check the fasteners are tightened, and lubrication of lubricating parts.
    3, The top-long centrifuge should be cleaned rollers and conveyor to have a confirmation no jamming before boot.
    4, Machine operation should idling for 10-15 minutes, confirm centrifuge normal operation, then open the pump for a small to large amount of slurry, adjusted to a suitable date.
    5, if the drilling fluid viscosity is too high, should be appropriately adding dilution water, to reduce viscosity, to accelerate the solid phase precipitation speed, improve the processing capability of the centrifuge.

    Technical parameters:

    Model

    Max. Bowl Speed
    r/min

    Treating Capacity
    m³/h

    Separation point
    µm

    Main motor power
    kw

    Back motor power
    kw

    LW455-NY

    1800

    50

    2.5-5

    30

    5.5

    LW500-NY

    1800

    60

    2.5-5

    37

    7.5

    Hits£º7871  Edttime£º2011/10/27 ¡¾Print this page¡¿ ¡¾Close¡¿
    Copyright @ Dongying Yongji Petroleum Machinery Company Limited
    国产亚洲精品字幕在线观看_国产三级专区精品_尹人久久久香蕉精品_亚洲日韩国产成网在线观看